This is multi-channel slip ring for motion simulator, housing material is aluminum alloy, its length is 438mm. You can see there are more than 150 channels at both rotor and stator side to transmit power and signal, and the wire length reach 2m. Slip Rings are used wherever electric currents or signals need to be transmitted from a stationary machine element to a rotating shaft or vice versa.
ECN000-14P1-157P | Specification |
| Current | 171 circuits electrical power |
| Voltage | 240VAC/150VDC/50VDC |
| Electrical noise | ≤70mΩ(50rpm) |
| Dielectric strength | ≥1000V@50Hz ≥300V@50Hz (signal) |
| Isolation resistance | 500MΩ@500VDC 100MΩ@300VDC (signal) |
| Operating speed | 0-100 rpm |
| Contact material | gold to gold |
| Housing material | aluminum alloy |
| Operating temperature | -20~+60℃ |
| IP protection grade | IP54 |
Outline drawing
Email:sales@ceno360.com
Tel: +86(755) 2342 0945
Fax: +86(755) 2342 0749
Web: http://www.ceno360.com
Address:BuildingB, Xinjianxing Technology Industrial Park, Fengxin Road, Guangming New District, Shenzhen,China.
Product
Application
News
About Us
+86(755) 2342 0945
Email：Email：sales@ceno360.com
CN
skype
phone
message
