ECN012-02P1-02S is a K Therm couple signal slip ring with hole shaft from CENO Electronics, there are 2 circuits for 5A and 2 circuits for K Therm couple signals. We can provide different solution according to customer’s requirements, inner bore size can be choose from 3mm to 980mm, wide temperature measurement range from -270℃ to +2800℃, high measurement precision and thermal couple type is optional. Mainly applied on chip mounter, automation machinery and agitator in chemical engineering.
Specification
ECN012-02P1-02S | Specification |
Current & Circuits | 2circuits*5A, 2circuits*K Therm couple |
Rating Voltage | 0~220 VAC/VDC |
Dielectric strength | ≥1000VAC@50Hz;≥500VAC@50Hz |
Isolation resistance | ≥500MΩ@500VDC;≥300MΩ@100VDC |
Electrical noise | ≤70mΩ (50rpm) |
Operating speed | 0~100rpm |
Contact material | Precious metal |
Housing material | Aluminum alloy |
Working temperature | -20°C~+150°C |
Working humidity | 60% |
IP protection grade | IP51 |
Through hole size | Ø12mm |
Lead wire length | Rotor : 300mm Stator : 300mm |
Installation | Rotor side fixed on the main shaft with screws |
Outline drawing