The ECN Series electrical through bore slip ring is a rotating assembly used to transfer power,control circuits or data (analog / digital) from stationary inlets to rotating outlets.ECN Series slip rings feature a 25.4 mm through bore for shaft mounting and incorporate low-wear, fiber brush contacts that do not require lubrication producing virtually no wear debris.Standard models are available from 6 to 24 circuits. We can provide you with professional design solutions according to the number of wires,current,voltage, signal type,wire length,installation size,rotation speed,working temperature,protection level,etc. , available.
ECN025-08P3-08S | Specification |
Circuits & Current | 8*15A,8*signal |
Voltage | 0~380VAC |
Electrical noise | Max 30mΩ (50rpm) |
Dielectric strength | ≥1000V@50Hz (power) ≥500V@50Hz (signal) |
Isolation resistance | 500MΩ@500VDC (power) 100MΩ@100VDC (signal) |
Operating speed | 0-300 rpm |
Contact material | Precious metal |
Housing material | Aluminium housing |
IP protection grade | IP54 |
Through hole size | 25.4 mm |
Working temperature | -40C°~ +80C° |
Outline drawing
Email:sales@ceno360.com
Tel: +86(755) 2342 0945
Fax: +86(755) 2342 0749
Web: http://www.ceno360.com
Address:BuildingB, Xinjianxing Technology Industrial Park, Fengxin Road, Guangming New District, Shenzhen,China.
Product
Application
News
About Us
+86(755) 2342 0945
Email：Email：sales@ceno360.com
CN
skype
phone
message
